top of page

Should Maintenance Technicians Own Their Own Tools?

4 days ago
4 min read

Updated: 3 days ago

I don't want to see a Leatherman taking apart a million-dollar machine. 


I don't want to see channel locks used where a wrench should be.  I don't want to see an off-quality or under-rated meter on 480v.  I don't want to see a hammer used instead of a mallet. 


I do want to see the right tool, of good quality and in good condition, taken out of an organized toolbox and used on the equipment. I want to see tools that won't damage the equipment or hurt my people.


So here's my answer to a question our industry doesn't really agree on: should your technicians own the tools they use on your equipment?


My answer: No.


The company should own the tools because that lets the company set the standard for the tools.


If You Don't Buy It, You Can't Demand It


The tools go on the machine. Whatever touches your equipment determines the state of your equipment. If you want to control safety and quality of work, you have to control the tools.


If you don't provide the tools, you are not in a position to demand what tools get purchased or what quality they should be. You've given up control of that as a standard.


What you get instead is predictable. Techs buy what they can afford and make do with what they have. Channel locks end up on everything.  Standard and metric allen wrenches become interchangeable.  Fasteners get rounded off across the entire plant, one "good enough" at a time.


And repair times suffer.


Professional-grade work comes from professional-grade techs with professional grade expectations using professional-grade tools. 


The Senior Tech Problem


Every plant has a Senior Tech.


The Senior Tech has his own megger. It's a good one. So everybody uses his megger.


Then he goes on vacation. Or retires. Or takes a job across town. And suddenly your plant can't do insulation testing... because he left... or maybe just locked his toolbox.


Your capability should never depend on one person's personal purchases. If a tool is critical to keeping your equipment running, the plant should own it, track it, and know where it is.


The System: A Basic Load and a Real Tool Crib


This isn't about buying every tool in the catalog. It's a two-tier system.


Tier one: the basic load. Every tech gets a standard tool bag or small cart with the simple stuff you always want on-hand: sockets, wrenches, screwdrivers, Allen wrenches, a meter. The everyday basics.


Tier two: the tool crib. Specialty tools that aren't used every day live in a crib where techs can quickly get what the job calls for. This is where you buy really nice tools, inventory them, and keep track of them. You always know what you have and what you need.


Two details make this work.


First, everything in the standard tool load is kept in stock. When a tech loses a socket or an Allen wrench, they check-out a replacement. The basic load never wears down to "whatever's left," and nobody grabs pliers because the right tool went missing or was borrowed.


That way there is no excuse for not having the right tools.  If someone doesn't have what they need, you tell them to go check it out and get their tools back in order.


Second, you track your shared tools by inspecting the tool crib.  Your crib needs to be striped and labeled to where you can immediately identify any tool that's missing just by inspecting it.  Check it every day. Tools that are checked don't turn up missing.


Once You Own It, You Can Hold the Line


Ownership changes what you can require.


When the plant supplies the tools, you can absolutely and unequivocally demand that every tech carries both metric and standard Allen wrenches. When techs have to buy their own, they treat them as interchangeable. A 5/32 goes into a 4 mm socket head screw, and another fastener is ruined.


When you own the tools, you can also demand a level of tool maintenance. Tools are kept clean and organized. Worn or damaged tools come out of service and get replaced at the crib, not kept in use because nobody wants to pay for a new one.


Certified Tools and Company Tools Can't Live in Personal Toolboxes


Some tools need to be certified/inspected: torque wrenches, meggers, and harnesses. Tracking those is hard enough. It becomes nearly impossible when company tools are mixed in with personal tools.


If every toolbox in the building belongs to a technician and you buy an expensive specialty tool, where does it end up? In a personal toolbox.


And once a company tool goes into a personal toolbox, it's not coming back to the crib.  Once it's in a personal toolbox long enough, it becomes a personal tool.


If you want to be able to verify calibration, your calibrated tools need to be in the tool crib where you can find it for inspection/calibration.  And if you're buying expensive stuff, that should be in the crib too.


Personal toolboxes are a menace to shops being able to handle calibrations and high-end tools... they lock your tools up when you need them and they're a conduit for losing company tools.


Keep company tools company-owned by making all tools company owned. Certified/expensive/calibrated gear lives in the crib and goes back after every job.


One Caveat


If your plant isn't ready to raise the quality and selection of its tools above what's in use today, don't bother. If you're going to take the same shortcuts your techs already have (and you're not going to put a supply system behind it), buying company tools just moves the cost onto your books and gets you nothing.


The whole play is to force the right tools onto the equipment, and to make it easy to get and maintain them. Owning the tools is the lever. Higher standards are the point.


Professional-grade work comes from professional-grade techs using professional-grade tools.


Having the right tools is only part of the solution.

Consistent maintenance performance requires clear standards, the right resources, and a system that reinforces how work gets done.


180 OPEX helps manufacturers build those systems without adding to leadership's workload.


Comments


bottom of page