top of page


Maintenance Detective: The Motor That Never Finished Starting
A 75 HP hydraulic pump motor on a star-delta starter for an injection molder has started acting up. At idle, it sounds fine. Spins up, settles in. Normal. But as soon as the machine starts cycling and the pump picks up real load, the motor bogs down. Sounds like it has too much load. Cycle times stretch longer than normal. The motor case is too hot to keep your hand on and the overload is tripping a couple times per shift. Techs are just resetting it. The day shift tech alr

Mac Davis
4 min read
bottom of page
